I have bought a a YI webcam and it has arrived today.I did not manage to connect to the camera to YI home app on android, at that point I scanned the barcode which could be found on the camera manual and downloaded Mi Home. You need to follow these steps below to fix the cam: * Turn off the camera * Pull out the memory card * format the sd in FAT32 * extract and copy the firmware file to the memory card home (link for the firmware I use) https://yadi.sk/d/KCkz0xjpjm K5o * Turn on the camera and hold down the reset button for 6-8 seconds * Turn off the camera * Insert the memory card * Turn on the camera * Wait for about 5 minutes (will flash orange, then turn orange, then speak Chinese and then will flash orange) * Connect the camera via the camera app My personal recommendation is to create a new MI account for your application because of any previously stored location and camera data. * Turn off the camera * Pull out the memory card * format the sd in FAT32 * extract and copy the firmware file to the memory card home (link for the firmware I use) https://yadi.sk/d/KCkz0xjpjm K5o * Turn on the camera and hold down the reset button for 6-8 seconds * Turn off the camera * Insert the memory card * Turn on the camera after i turn on the camera, it prompting "system resetting" then " waiting for connection", waited for 5mins then connect through phone and still getting the " only in china" message This post was edited by ATH4real at , Jun-04-2016 You have a few chioces to make a Chinese Ants webcam work. Downgrade firmware to a previous verison such as K or L (you may have to downgrade in small steps, ie to go from 184.108.40.206C to A, then to 220.127.116.11M and then to K version, You have to try what works for you).While Rogers often takes the lead consoling victims and grilling suspects, Kirkpatrick can wade through thousands of lines of code to find the slightest abnormality.
Just follow the instructions here, and read the comments as well: https://diy.2pmc.net/solved-xiaomi-xiao-yi-ant-home-camera-can-used-china/ Please note that with 18.104.22.168C you will get a YI watermark on your videos. In time, maybe someone can find solution to turn a CN (Chinese) version to a US (International) version. Hi, I have EU firmware from contact support in Poland -they send me a file home and Then I found this forum and followed those steps, and voila!! To be more precise, it worked for me for a while, till i installed the new camera firmware via Mi Home v3.4.9 andorid app (i've tried the i OS app too with the same result).
Then the camera and app would work as if we lived in China. Is there a chance to work this firmware on CN camera with official Google Play Yi home? After when i first heard the 'this camera can only be used within china' promt, i manually reset many times, but the reconnection was ineffective.
And when she finally did go back to class, she couldn't concentrate.
Amy knew it was irrational, but she couldn't help scanning the crowd, looking for her stalker. He, too, had holed up alone, away from family and friends.
Then the hacker contacted James directly, boasting that he had control of his computer, and it became clear this wasn't about sex: He was toying with them. But the instant she phoned the dispatcher, a message chimed on her screen. Whoever devised the malware—a sophisticated program capable of dodging antivirus software—clearly had a leg up on university cops.